Return bearing when it wraps past north?

I’m revising bearings for a test and if a boat goes from A to B on a bearing of 065°, I think the bearing of A from B is 245° (add 180°), but I’m second‑guessing myself-do I ever need to do 360° − something instead when it ‘wraps past’ north, or am I overthinking it? Also, is 245° already the proper 3‑figure way to write it, or should I pad it somehow?

3 Responses

  1. You’ve got the right idea! A back bearing is just “turn around 180°.” In bearing-speak (measured clockwise from north), the clean rule is: if the original bearing is less than 180°, add 180°; if it’s 180° or more, subtract 180°. So from A to B is 065°, then from B to A is 065° + 180° = 245°. That’s already in proper three-figure form, so 245° is perfect. No extra padding needed.

    About “wrapping past” north: you don’t need a special 360 − something trick-just keep your result between 000° and 359° by adding or subtracting 360° if necessary. For example, if the boat went from A to B on 200°, then the bearing back is 200° − 180° = 020° (note the leading zero). Or if it went on 350°, then back is 350° + 180° = 530°, and 530° − 360° = 170°. The only time you bring 360° into it is to nudge your answer back into the 0–359 range.

  2. Love this question-bearings are like modular arithmetic on a compass! If the boat goes from A to B on a bearing of 065°, then the bearing of B from A is 065° + 180° = 245°, which you’d write as a neat 3‑figure bearing: 245°. The general rule is “add 180° if it’s less than 180°, subtract 180° if it’s 180° or more,” which is the same as “add 180° and wrap around 360° if needed.” A small gotcha: when it “wraps past” north, some people try a shortcut like 360° − (original bearing), but that actually gives you the other side’s complement to north rather than the true back bearing, so it’s only sometimes helpful when sketching. Simple worked example: if A→B is 300°, then B→A is 300° − 180° = 120°; if A→B is 170°, then B→A is 170° + 180° = 350°. And yep, 3‑figure just means three digits (so 065°, 245°); you don’t need to pad 245° to 0245°, though I’ve seen some navigation notes do that stylistically. If you want a clear refresher with diagrams, this page is great: https://www.mathsisfun.com/geometry/bearings.html.

  3. You’re right: if A to B is 065°, then the bearing of A from B is 245°. In general, the back bearing is θ + 180 reduced to the 0–359 range. A quick rule of thumb: if θ < 180, add 180; if θ ≥ 180, subtract 180. The “wrap past north” is handled automatically by this reduction-for example, from 350° the back bearing is 350 + 180 = 530, then 530 − 360 = 170°. Likewise, from 185° the back bearing is 185 − 180 = 005°. Think of a compass like a roundabout: the reverse direction is just a half‑turn to the opposite point on the circle. And yes, bearings are written as three figures with leading zeros where needed, so 065°, 245°, 005°, etc. A short refresher is here: https://www.mathsisfun.com/geometry/bearings.html

Leave a Reply

Your email address will not be published. Required fields are marked *

Join Our Community

Ready to make maths more enjoyable, accessible, and fun? Join a friendly community where you can explore puzzles, ask questions, track your progress, and learn at your own pace.

By becoming a member, you unlock:

  • Access to all community puzzles
  • The Forum for asking and answering questions
  • Your personal dashboard with points & achievements
  • A supportive space built for every level of learner
  • New features and updates as the Hub grows